|
|
Build Your Online Product Catalogs?
| Product Name: |
Addition Thermally Conductive Flame Retardant Silicone Rubber
|
| Supply Ability: |
1000 Tons |
| Related proudcts |
silicone rubber, addition, thermally conductive, |
| Specifications |
2 Components liquid |
| Price Term: |
FOB |
| Port of loading: |
|
| Minimum Order |
1ton |
| Unit Price: |
|
|
Characteristic and Usage:
This series of products is addition thermal-conductive liquid silicone rubber consisting of two components. They have excellent electric resistance, moisture resistance, shock proof and heat conductivity. Difficult to poisoning when using, can cure at room temperature or high-temperature. It is widely used for protecting and sealing the cooling electrical and electronic components, and can effectively reduce component operating temperature.
Typical properties:
(Non-standard values)
Properties 8580 8680 8780 8880
Mixing proportion 1:1 1:1 1:1 1:1
Color Gray/White Black Gray/White Gray/White
Viscosity(25)/m Pa.s 5000 3000 6500 8000
Operation time/h 35-60 35-60 35-60 35-60
Surface cure time/h 4 4 4 4
Thermal curing time (min/) 8min/80 8min/80 8min/80 8min/80
Physical properties after vulcanization
Hardness / Shore A 60-65 60-65 60-65 60-65
Tensile strength / *** 1.5 1.5 1.5 1.5
Breaking elongation/% 50 50 50 50
Density / g.cm-3 1.5 1.2 1.8 2.1
Heat conducting coefficient / W.(m.K)-1 0.8 0.6 1.2 1.3
Electrical properties after vulcanization
Volume electric resistance rate / ¦¸.cm 1.0×1014 1.0×1014 1.0×1014 1.0×1014
Puncture voltage / kV.mm-1 22 22 22 22
Dielectric constant (50Hz) 3.0 3.0 3.0 3.0
Dissipation factor (50Hz) 0.005 0.005 0.005 0.005
Relevant certification ROH\UL ROHS\UL ROHS\UL ROHS\UL
Characteristic Medium heat conduction\Flame retardant Low viscosity,flame retardant and heat conduction High heat conduction, Flame retardant High heat conduction, Flame retardant
Usage LED Highpowered power supply\Electronic components\HID Power supply\micro source etc. cooling and sealing
Application:
1. The material should be fully stirred before use, component A and component B are mixed according to 1:1(weight or volume) by hand or machine.
2.If the final product is sensitive to air, the rubber need vacuum to debubble after mixing.
3.The viscosity will increase in co***ny with time, and it will be twice after 30 minutes at normal temperatur |
| Company: |
Shenzhen LiYaTe Technology Co., Ltd
|
| Contact: |
Ms. Jelly Peng |
| Address: |
#9 Xinhu Niuhu Rd, Guanlan Town |
| Postcode: |
518110 |
| Tel: |
0086-0755-88853918 |
| Fax: |
0086-0755-2802020 |
| E-mail: |
|
|
|
|
Home
